Nozzles & Plates
Bambu Lab build plate sizes
There are two plate classes in this lineup, not one. Getting it wrong is an easy mistake because the compatibility lists are long - and the machine they leave off is always the same one.
By Michael W. · Published October 17, 2026

Some links here are Amazon affiliate links, so a purchase may earn this site a commission at no cost to you. It does not change what gets recommended or the order it appears in — how that works.
The short answer
There are two plate classes in the Bambu Lab lineup, not one. The 256 mm machines — the A1, P1P, P1S, P2S, X1C and X2D — share a plate class. The A1 mini does not: 3DJake lists its build volume at 180 x 180 x 180 mm.
Third-party plates for the 256 mm class list 257 x 257 mm. That is the registry figure for both the BIQU CryoGrip Pro Glacier and the BIQU Designer Series plates, each fitting seven named Bambu models.
A long compatibility list is not a universal one. Both of those plates name seven machines and neither names the A1 mini. If you own one, check the specific fitment line rather than assuming a plate that fits an A1 fits an A1 mini.
Plate class by machine
| Machine | Build volume | Plate class | Named on the 257 mm third-party plates? |
|---|---|---|---|
| A1 | 256 x 256 x 256 mm | 256 mm class | Yes |
| P1P | Not published by a source we fetched | 256 mm class | Yes |
| P1S | 256 x 256 x 256 mm | 256 mm class | Yes |
| P2S | 256 x 256 x 256 mm | 256 mm class | Yes |
| X1C / X1E | Not published by a source we fetched | 256 mm class | Yes |
| X2D | 256 mm cube (reported) | 256 mm class | Yes |
| A1 mini | 180 x 180 x 180 mm | 180 mm class — its own | No |
| H2 series | H2S 325 x 320 x 325 mm, H2D 350 x 320 x 325 mm (both reported) | Large format — its own | No |
Why the A1 mini is its own class
This is the practical core of the page. 3DJake lists the A1 mini at a build volume of 180 x 180 x 180 mm with a maximum bed temperature of 80 C, against the A1's 256 x 256 x 256 mm and 100 C bed. The bed is physically smaller, so a plate sized for the A1 overhangs it in both axes.
The reason this catches people is naming. The A1 and A1 mini share a product family, a control interface, an AMS unit and most of their accessories — so it is reasonable to assume they share a plate, and they do not. Both of the third-party plates on this page list the A1 and omit the A1 mini.
What follows for an A1 mini owner is simply that the plate market is smaller. Check each listing's own fitment line for “A1 mini” specifically rather than reading “A1” and stopping. What the A1 and A1 mini can actually print covers the other place these two machines diverge, which is the 80 C bed ceiling.
What the plate class actually buys you
Being in the 256 mm group has a value people underrate: your plates outlive your printer. Both third-party plates here name seven machines, which means a plate bought for a P1S fits a P2S, an X1C or an X2D later. The registry makes that point directly — it survives your next printer.
That changes the arithmetic on owning more than one plate. The registry's argument for a second plate is that it keeps the queue moving when a first layer fails, and if the plate carries across machines it is not a per-printer cost. The best build plates for a Bambu Lab is the roundup.
Size is not the only fitment question
Surface, which is a material decision
Within one size you are choosing a surface, and surfaces are not interchangeable by material. Textured PEI grips hard and releases when cool but stamps its pattern into the first layer. Smooth PEI and PEO give a glossy underside and demand a cleaner plate and a more accurate Z offset. Coated spring steel is a third behavior again — the registry notes adhesion differs by material and to expect a learning print or two.
Bed temperature, which the plate has to tolerate
Bed ceilings differ across the same plate class: Makerpoint lists the P1S at 100 C, 3DJake lists the P2S at 110 C and the A1 at 100 C. A plate fitted to a hotter bed sees more thermal cycling, which is part of why PEI surfaces are consumable. Textured PEI plate temperature, by material has the published per-material settings.
Z offset, every time you change anything
Swapping plate brands, or flipping a double-sided plate, changes the distance from nozzle to surface. The registry flags re-doing Z offset for third-party plates and for each side of a flippable one. Skipping it produces a first-layer failure that reads as an adhesion problem. The build plate mismatch error is the related page when the printer itself objects.
If you own an H2-series machine
The H2 chassis is large format and takes its own plate. The registry reports the H2S at 325 x 320 x 325 mm and the H2D at 350 x 320 x 325 mm, both well outside the 256 mm class, and neither third-party plate above lists them.
No source we fetched published a plate dimension for any H2-series machine, so this page does not state one. That is consistent with the wider picture the registry records: third-party accessory support for the H2 chassis is minimal because the machines are recent. Is the H2D worth it covers that trade, and printer dimensions is the sibling page for sizing the machine rather than the plate.
What this page is and is not based on
Build volumes and bed ceilings come from the Makerpoint P1S listing and the 3DJake A1, A1 mini and P2S listings retrieved 11 October 2026; the X2D and H2-series build volumes are registry figures labelled as reported, and machines for which no source we fetched published a build volume are named as such rather than estimated. The 257 x 257 mm plate size, every per-plate fitment list, the 0.5 mm steel base and each surface description are registry spec rows whose provenance is documented in content/products.ts. No plate dimension is given for the A1 mini or any H2-series machine, because no source we fetched published one. Nothing here was measured on a bench and no plate was fitted and compared; see how we review. No price appears in prose.
What to buy

Stock photograph of this product class, not of this specific unit.
#ad We earn a commission · price as of November 20, 2026
1. The default plate for the 256 mm machines
Bambu Lab Textured PEI Plate
Powder-coated textured PEI on a 0.5 mm stainless base with enhanced magnetic adhesion. The plate to replace first when adhesion goes, and the one to size everything else against.
This is the reference plate, so it is the right place to start a sizing question. The registry lists it as powder-coated textured PEI over a 0.5 mm stainless steel base with enhanced magnetic adhesion, stated to resist warping on large models in ABS, PC and nylon.
The 0.5 mm base is the figure that matters for fit as well as function. A plate thin enough to lift at the corners under a hot bed gives you a first-layer problem that looks like adhesion and is actually geometry. Stiffness is part of the specification, not a bonus.
Two honest cautions from the registry: PEI surfaces are consumable, and skin oils and aggressive scraping both shorten their life. The textured PEI plate is the detail page, and textured PEI plate temperature by material has the published settings.
What it gets right
- Powder-coated texture grips hard without glue stick and releases when cool, which is the whole job
- The 0.5 mm steel base is stiff enough that it does not lift at the corners under a hot bed
- Hides first-layer imperfections, so a slightly off Z offset is forgiving rather than a failure
What it does not
- The texture transfers to your first layer — wrong plate for anything whose bottom face is a show surface
- PEI surfaces are consumable; skin oils and over-aggressive scraping both shorten their life
- TPU can grip hard enough on textured PEI to tear the surface on removal
| Surface | Powder-coated textured PEI |
|---|---|
| Base | 0.5 mm stainless steel with enhanced magnetic adhesion |
| Stated strength | Resists warping on large models in ABS, PC and nylon |

2. The plate whose fitment list tells you the most
BIQU CryoGrip Pro Glacier Panda Build Plate
A 257 x 257 mm double-sided coated spring steel sheet listed for the P1S, P1P, P2S, X1C, X1E, X2D and A1. Seven machines, one plate class.
This plate is worth studying before you buy any plate, because its compatibility list is the clearest statement of the plate classes in this lineup. The registry lists it at 257 x 257 mm, fitting the Bambu Lab P1S, P1P, P2S, X1C, X1E, X2D and A1.
Read what is not on that list. Seven machines are named and the A1 mini is not, because its bed is 180 x 180 mm. That is the single most useful fact on this page: a long compatibility list is not a universal one.
The registry is clear about the trade with any third-party surface: re-do your Z offset and probably your first-layer flow, coated steel is not PEI so adhesion behavior differs by material, and nothing here is an upgrade over a healthy official plate — it is a spare. A spare is exactly what keeps a machine printing. The build plate roundup ranks them.
What it gets right
- Fits seven different Bambu models, so it survives your next printer
- Priced to be the second plate, which is what actually keeps a machine printing
- Textured coating releases cooled parts cleanly without a scraper
What it does not
- A third-party surface means re-doing your Z offset and probably your first-layer flow
- Coated steel is not PEI — adhesion behavior differs by material, so expect a learning print or two
- Nothing here is an upgrade over a healthy official plate; it is a spare
| Surface | Double-sided coated spring steel sheet |
|---|---|
| Size | 257 x 257 mm |
| Fits | Bambu Lab P1S, P1P, P2S, X1C, X1E, X2D and A1 |

3. Two surfaces at the same 257 mm size
BIQU Designer Series Smooth PEO + Textured PEI Build Plate
A 257 x 257 mm double-sided plate, smooth PEO one face and textured PEI the other, listed for the P1P, P1S, P2S, X2D, X1C, X1E and A1.
The same 257 x 257 mm size, the same seven-machine fitment, a different surface proposition. The registry lists this as a double-sided PEI-coated spring steel plate with smooth PEO on one face and textured PEI on the other, flexible and removable.
It is worth including on a sizing page because it demonstrates that the plate class is a platform rather than a product: once your machine is in the 256 mm group, several surfaces fit the same magnetic bed and you are choosing a finish rather than a size.
The registry's cautions apply: flipping means re-checking Z offset for that side every time, smooth surfaces are less forgiving on adhesion than textured so expect glue on tall parts, and a third-party surface needs a tuning print. Textured PEI versus smooth PEI is the comparison.
What it gets right
- Two surfaces on one plate, so a visible underside does not mean buying a second plate
- Smooth PEO is the surface that actually gives a glossy bottom face, which textured PEI cannot
- Fits seven Bambu models, so it outlasts the printer you bought it for
What it does not
- Flipping the plate means re-checking your Z offset for that side every time
- Smooth surfaces are less forgiving on adhesion than textured PEI — expect glue on tall parts
- Third-party surface, so first-layer flow needs a tuning print
| Type | Double-sided: smooth PEO one face, textured PEI the other |
|---|---|
| Material | PEI-coated spring steel, flexible and removable |
| Size | 257 x 257 mm |
| Fits | Bambu Lab P1P, P1S, P2S, X2D, X1C, X1E and A1 |

Stock photograph of this product class, not of this specific unit.
#ad We earn a commission · price as of November 20, 2026
4. The first-party two-surface option
Bambu Lab Dual-Texture PEI Build Plate
Textured PEI one side, smooth PEI the other, on the same 0.5 mm magnetic stainless backing as the single-sided plate. One plate instead of two.
If you would rather stay on first-party surfaces, this is the two-in-one. The registry lists textured PEI on one side and smooth PEI on the other, over the same 0.5 mm magnetic stainless steel backing as the single-sided plate, with the same stated enhanced magnetic adhesion and warp resistance.
Same backing means same fit, which is the sizing point: within a plate class, the base is the interface and the surface is the choice. The smooth side gives a glossy bottom face that textured PEI cannot produce.
The honest limits: smooth PEI is much less forgiving about Z offset and bed cleanliness than textured, flipping doubles the handling, and fingerprints are what kills PEI adhesion. When prints will not stick to the plate covers that failure properly.
What it gets right
- Two surfaces on one plate — flip it rather than buy and store a second
- The smooth side gives a glossy bottom face that textured PEI cannot produce
- Same 0.5 mm steel backing and magnetic grip as the single-sided plate
What it does not
- Smooth PEI is much less forgiving about Z offset and bed cleanliness than textured
- Flipping means twice the handling, and fingerprints are what kills PEI adhesion
- If 95% of your prints are functional, the textured-only plate is the cheaper right answer
| Surfaces | Textured PEI one side, smooth PEI the other |
|---|---|
| Base | 0.5 mm magnetic stainless steel backing |
| Stated benefit | Enhanced magnetic adhesion, resists warping |
Questions people actually ask
What size is a Bambu Lab build plate?
For the 256 mm machines - the A1, P1P, P1S, P2S, X1C and X2D - the third-party plates in this site's registry are listed at 257 x 257 mm. The plate is slightly larger than the 256 x 256 mm build volume on purpose: the build volume is the area the toolhead reaches, while the plate needs material to grip, lift and locate by.
Do Bambu Lab printers all use the same build plate?
No. There are at least three classes. The 256 mm machines share one - and both 257 x 257 mm third-party plates in the registry name seven of them. The A1 mini is its own class, because 3DJake lists its build volume at 180 x 180 x 180 mm. The H2 series is large format and takes its own again.
Does an A1 build plate fit an A1 mini?
No, and this is the mistake the page exists to prevent. Both third-party 257 x 257 mm plates in the registry list the A1 and omit the A1 mini, because the mini's bed is 180 x 180 mm. The two machines share a family name, a control interface and an AMS unit, which is exactly why people assume they share a plate.
Why is the plate 257 mm when the build volume is 256 mm?
They measure different things. The build volume is the area the nozzle can reach; the plate is the physical sheet, and it is slightly bigger so there is an edge to grip, flex and locate against. A 257 x 257 mm plate on a 256 mm machine is the correct part, not a tolerance error.
Will a build plate fit my next Bambu Lab printer?
Within the 256 mm class, probably - both third-party plates here name seven machines, so a plate bought for a P1S also fits a P2S, an X1C or an X2D. That makes owning a second plate cheaper over time than it looks, since it is not a per-printer cost. Moving to an A1 mini or an H2-series machine means new plates.
What build plate does an H2D use?
Its own, and this page does not state a dimension for it because no source we fetched published one. The registry reports the H2D at 350 x 320 x 325 mm and the H2S at 325 x 320 x 325 mm, both well outside the 256 mm class, and neither third-party plate in the registry lists the H2 series - third-party support for that chassis is still minimal.
Sources
- P1S build volume (256 x 256 x 256 mm), 300 C nozzle and 100 C bed - Makerpoint P1S listing, retrieved 2026-10-11
- A1 build volume (256 x 256 x 256 mm), 100 C bed and 300 C nozzle - 3DJake A1 listing, retrieved 2026-10-11
- A1 mini build volume (180 x 180 x 180 mm) and 80 C maximum bed temperature - 3DJake A1 mini listing, retrieved 2026-10-11
- P2S build volume (256 x 256 x 256 mm), 300 C nozzle and 110 C bed - 3DJake P2S listing, retrieved 2026-10-11
- Plate sizes (257 x 257 mm on the third-party plates), per-plate fitment lists, surface types and base thicknesses come from this site's product registry, whose spec provenance is documented in content/products.ts - no figure is asserted that a manufacturer or a cited third party did not publish
Read this next
- The best build plates for a Bambu LabTextured, dual-texture or third-party - which plate to buy, and why owning two beats owning one good one.
- Textured PEI vs smooth PEITextured for grip and forgiveness, smooth for a glossy bottom face. Which to use per print, and the dual-texture middle ground.
- Textured PEI plate temperature, by materialBambu Lab's published heatbed temperature for every material on the textured PEI plate, and the three things to change before you raise it.
- The Bambu Lab build plate mismatch errorWhy "the current build plate is not the same as in G-code" appears, the five things that cause it, and the one case where the warning is right and you are wrong.
- Bambu Lab printer dimensions, and sizing a space for oneP1S 389 x 389 x 458 mm, P2S 392 x 406 x 478 mm, A1 465 x 410 x 430 mm, A1 mini 347 x 315 x 365 mm - plus the clearances an enclosure and an AMS add.
- What the A1 and A1 mini can actually printPLA, PETG and TPU are the A-series' home ground. ABS and ASA fight the open frame, and the A1 mini's 80 C bed closes off more than the A1's 100 C one.