Skip to content
Plate & Spool

Upgrades

The best Bambu Lab upgrades under $100

This is the price bracket that changes what the printer can do rather than how it looks. One part here unlocks a whole material class; another just fixes the thing that annoys you daily.

By Michael W. · Published November 7, 2026

Printer upgrade parts, a build plate and a small touchscreen laid out on a workshop bench

Some links here are Amazon affiliate links, so a purchase may earn this site a commission at no cost to you. It does not change what gets recommended or the order it appears in — how that works.

Quick picks

Tap any row to jump to the full write-up. Prices are read from Amazon and dated; stock is always whatever the listing says.

#ProductBest forPrice
1
BIQU Panda Touch product photo

BIQU Panda Touch

A 5-inch touchscreen for a printer that never had one, powered from the printer's own USB port and able to drive up to ten machines from one unit.

Best overall under $100
Giving a P1P or P1S the touchscreen it never had
$52.99 · View on Amazon

$55.99 · 5% off

#ad We earn a commission · price as of November 20, 2026

2
Bambu Lab Hotend with Hardened Steel Nozzle, 0.4 mm product photo

Bambu Lab Hotend with Hardened Steel Nozzle, 0.4 mm

A complete hardened steel hotend assembly for the P1S, P1P and X1C. The only part under this line that changes which filaments the machine can run.

Best capability upgrade
The one purchase that has to happen before your first spool of anything carbon-filled
$19.68 · View on Amazon

$21.98 · 10% off

#ad We earn a commission · price as of November 20, 2026

3
BIQU CryoGrip Pro Glacier Panda Build Plate product photo

BIQU CryoGrip Pro Glacier Panda Build Plate

A double-sided coated spring steel sheet at 257 x 257 mm that fits almost every 256 mm Bambu machine, including the P2S and X2D.

Best plate upgrade
A second plate so a failed first layer does not stop the queue
$19.19 · View on Amazon

$23.99 · 20% off

#ad We earn a commission · price as of November 20, 2026

4
BIQU Panda Jetpack Printhead Cover + Cooling Fan Duct product photo

BIQU Panda Jetpack Printhead Cover + Cooling Fan Duct

A nylon printhead cover with an integrated cooling duct, aimed at the overhangs and bridges that curl no matter what you change in the slicer.

Best print-quality upgrade
Overhangs and bridges that curl no matter what you do in the slicer
$29.99 · View on Amazon

#ad We earn a commission · price as of November 20, 2026

5
BIQU Panda Claw Extruder Gear Set product photo

BIQU Panda Claw Extruder Gear Set

Golden nano-coated hardened steel extruder gears for the X1, P1 and A1 series - the fix for gears that have started chewing filament instead of pushing it.

Best repair part to keep on the shelf
Worn extruder gears that are chewing filament instead of pushing it
$19.99 · View on Amazon

$24.99 · 20% off

#ad We earn a commission · price as of November 20, 2026

6
BIQU PyroGrip Textured PEI Plate product photo

BIQU PyroGrip Textured PEI Plate

Textured PEI on the same mounting system as the official plate, at a cited roughly half the official price. The cheapest upgrade here that still changes something.

Budget pick
Textured PEI at roughly half the official price, on the same mounting system
$15.19 · View on Amazon

$18.99 · 20% off

#ad We earn a commission · price as of November 20, 2026

The verdict

One part under $100 changes what the printer can do, and the rest change how it feels. The hardened hotend is the capability upgrade: Bambu's own carbon-filled listing tells you to use hardened steel instead of stainless, and the P1 and A series both ship stainless.

The best single buy at this line is the touchscreen. A P1S with a 5-inch screen is most of what the next machine up gives you in daily use, for a small fraction of the difference.

A second build plate is the cheapest uptime you can buy, and the double-sided sheet fits almost the whole 256 mm class including the P2S and X2D.

The cooling duct is the only part here that can change how a print looks — and it is wrong for ABS and ASA, which want less cooling, not more.

What this bracket cannot buy: an enclosure, a bigger bed, an actively heated chamber or a color system. Those are machines and accessories above the line, and no part on this page substitutes for one.

How to rank upgrades at this price

The catalog at this line is large and most of it is cosmetic. Four questions sort it, in this order.

1. Does it change the material list?

Only one category does: the flow path. A hardened hotend moves carbon-filled, glass-filled, metal-filled and glow filament from “will destroy the nozzle” to “routine”, and nothing else under this line changes which filaments the machine can run. Everything else on this page makes an existing capability more pleasant.

2. Does it fix a fault you actually have?

Extruder gears for a feed that slips, a duct for overhangs that curl, a plate for a first layer that will not stick. Buy for the symptom, not for the shelf. Several of the faults people buy parts for have free fixes first — print quality issues and print not sticking both start with the settings.

3. Does it remove a daily irritation?

The touchscreen is the purest example: no better prints, much better evenings. This is a legitimate reason to spend money, and it is also the category where people most often talk themselves into a whole new printer instead.

4. Does it fit your exact machine?

The most common wrong purchase in this hub, every time. The hardened hotend above fits the P-series and X1, not the A-series. The 257 mm plates fit the 256 mm machines, not the A1 mini. The touchscreen is built for the P1P and P1S. Check the fitment row on the product card against your model before ordering, and see build plate sizes and the A-series mods page if you own an A1.

What each part fixes

Fitment, material and feature rows are registry entries whose provenance is documented in content/products.ts, with vendor-stated claims labeled as stated. The factory nozzle material comes from the Bambu Lab wiki (P1 series) and the 3DJake A1 and A1 mini listings. Prices are not printed here - every buy button carries the live figure and the date it was checked.
PartWhat it fixesFitsChanges the material list?
Panda TouchNo touchscreen on a P1P or P1SP1P and P1S; also interfaces with X1 and A1 seriesNo
Hardened steel hotend, 0.4 mmAbrasive filament rounding a stainless nozzleP1S, P1P, X1C and X1 CarbonYes - the only one here that does
CryoGrip Pro double-sided plateA failed first layer stopping the queue; one surface for every materialP1S, P1P, P2S, X1C, X1E, X2D and A1No
Panda Jetpack cover and ductOverhangs and bridges that curlP1 and X1 series, plus Panda Revo and Flow hotendsNo - and wrong for ABS and ASA
Panda Claw extruder gearsWorn gears chewing filament instead of pushing itX1, P1 and A1 seriesNo
PyroGrip textured PEI plateA worn or single plate, at a cited half the official price256 mm class; not the A1 miniNo

Where this page sits against the neighbors

Three pages on this site cover upgrade shopping and they are not the same page.

Under $30 is the pocket-change tier, and it leads with the fixes that cost nothing at all. If your budget is genuinely tight, cheap upgrades worth buying is the better list, and two of the picks above appear there too because the cheap end of this bracket overlaps it.

This page is the bracket where a touchscreen and a hardened hotend become available — the parts that are still parts, not machines.

The full ranking ignores price and sorts the whole catalog by what each upgrade fixes, which is why it is headed by the AMS 2 Pro at several times this line. The upgrades roundup is the page to read if the budget is not the constraint.

The upgrades under $100 that are not worth it

A page that only says yes is not useful. Four things in this bracket get bought and regretted.

A second identical plate when you have no adhesion problem. Uptime is a real benefit, but if your first layers never fail you are buying a spare for a fault you do not have. Spend it on filament.

Cooling parts for an enclosed machine printing ABS. Those materials fail from too much cooling, not too little. The fix is a warmer, stiller chamber, not a better duct — chamber temperature is the page.

Replacing healthy wear parts on a schedule. Gears, PTFE tube and hotend are symptom-driven replacements on a hobby machine. What maintenance actually matters is explicit that the highest-return hour you can spend here costs nothing.

Anything bought to fix wet filament. No part on this page helps a spool that has absorbed water, and the symptoms get blamed on the printer constantly. The best dryer under $100 is the category that does fix it, at the same kind of money.

Who should buy what

You own a P1S and the workflow annoys you. The touchscreen, and nothing else on this page will feel as good.

You want to print carbon-filled or glow filament. The hardened hotend, first, and read the 0.6 mm note above if the material is a carbon-filled nylon.

Your prints fail on the first layer. A plate — the double-sided one if you print varied materials, the budget textured sheet if you mostly print one.

Your overhangs curl and the slicer has not fixed it. The cooling duct, after the free fixes.

Your extruder is slipping. The gear set, after confirming it is not a clog, a loose PTFE connector or a badly wound spool.

You are weighing all of this against a new machine. Read the best printer under $500 next: at this budget the structural things — an enclosure, a bigger bed — are the only ones worth buying a machine for, and everything else on this page is cheaper than the difference.

What this page is and is not based on

Fitment, material and feature rows for all six parts are registry entries whose provenance is documented in content/products.ts, with vendor claims labeled as the vendor's. The factory nozzle material point comes from the Bambu Lab wiki's P1S extruder upgrade page and the 3DJake A1 and A1 mini listings retrieved 7 November 2026; the hardened-nozzle instruction for filled filament comes from the MatterHackers PA6-CF listing retrieved 31 October 2026. BIQU fitment is cross-checked against the OpenELAB upgrade guide. The $100 line was set and verified against the live Amazon figures in this site's price layer on 7 November 2026, and no other dollar amount appears in this copy. I have not bench-tested any of these parts, timed a print with and without the duct, or measured nozzle wear: there is no test lab behind this site, which is why the reasoning above is mechanism and published fitment rather than results. See how we review.

Every pick in full

BIQU Panda Touch product photo
$52.99 · View on Amazon

$55.99 · 5% off

#ad We earn a commission · price as of November 20, 2026

1. Best overall under $100

BIQU Panda Touch

A 5-inch touchscreen for a printer that never had one, powered from the printer's own USB port and able to drive up to ten machines from one unit.

This is the upgrade that fixes the most-complained-about thing on the most-owned machine. The registry records a 5-inch touchscreen that fits the P1P and P1S and also interfaces with the X1 and A1 series, powered from the printer's built-in USB port, with the vendor stating that installation does not void the printer warranty and that one unit can control up to ten Bambu printers.

The reason it sits at the top of this page is the ratio. A P1S with a touchscreen is most of what the next machine up offers in daily use, at a fraction of the difference in price — which is the central argument of this whole site and the reason upgrading from a P1S usually concludes “keep it”. If you have been pricing a P2S because changing a print feels like using a mobile phone from 2009, start here. The full Panda Touch review is the product page.

Honest cons. It is a convenience upgrade and it will not improve a single print. The multi-printer control claim is the vendor's, not something measured here. And if you own a machine that already ships with a screen, there is nothing in this for you.

What it gets right

  • This is the feature people buy a P2S for, at a fraction of a new printer
  • Powered from the printer's own USB port, with a bracket that fits the P1P/P1S screen cutout
  • Controlling up to 10 printers from one screen makes it the cheapest print-farm console there is

What it does not

  • It is a control surface, not a capability — it changes nothing about print quality
  • Third-party firmware sitting between you and the printer can lag behind a Bambu firmware update
  • If you genuinely never wanted a screen, skip it; the app does the same job
BIQU Panda Touch — published specifications
Screen5-inch touchscreen
FitsBambu Lab P1P and P1S; also interfaces with X1 and A1 series
PowerThe printer's built-in USB port
Multi-printerControls up to 10 Bambu printers from one unit
WarrantyVendor states installation does not void the printer warranty
Bambu Lab Hotend with Hardened Steel Nozzle, 0.4 mm product photo
$19.68 · View on Amazon

$21.98 · 10% off

#ad We earn a commission · price as of November 20, 2026

2. Best capability upgrade

Bambu Lab Hotend with Hardened Steel Nozzle, 0.4 mm

A complete hardened steel hotend assembly for the P1S, P1P and X1C. The only part under this line that changes which filaments the machine can run.

Everything else on this page makes the printer nicer to use. This one changes what it can do. The Bambu Lab wiki records the P1 series as shipping a stainless steel hotend and extruder suited to standard non-abrasive filament, and 3DJake lists both A-series machines with a 0.4 mm stainless nozzle as supplied. The MatterHackers PA6-CF listing is blunt about what that means for filled filament: use a hardened steel nozzle instead of stainless.

Abrasive filament is more common than people expect — carbon-filled, glass-filled, metal-filled, wood-filled, marble-effect, glitter silk and glow-in-the-dark all qualify, and with the worst of them a single print can measurably round the tip of a stainless nozzle. The registry lists this part as a complete assembly rather than a bare nozzle, so fitting it is a module change rather than surgery. Whether you need a hardened nozzle lists the materials that require one, including the ones that surprise people.

Two notes before you buy. For carbon-filled nylon specifically, both of Bambu's own listings recommend 0.6 mm rather than 0.4 mm, because chopped fiber bridges a narrow bore — that part is above this line in the same family, and the carbon fiber page explains the trade. And this assembly fits the P-series and X1 only; the A-series and H-series take their own parts.

What it gets right

  • Abrasive filament rounds a stainless nozzle fast — with the worst materials, a single print can do it
  • Comes as a complete assembly, so the swap is a module change rather than a nozzle extraction
  • 0.4 mm keeps your existing print profiles valid

What it does not

  • Hardened steel conducts heat slightly worse than stainless, so very high-flow PLA needs a small temperature bump
  • Pointless if you only ever print plain PLA and PETG — stainless lasts for years on those
  • P-series and X1 only; the A-series and H-series need their own part
Bambu Lab Hotend with Hardened Steel Nozzle, 0.4 mm — published specifications
NozzleHardened steel, 0.4 mm
FitsP1S, P1P, X1C and X1 Carbon (model FAH001-N-1)
Hardness referenceHardened steel is cited at HRA 74
Supplied asComplete hotend assembly
BIQU CryoGrip Pro Glacier Panda Build Plate product photo
$19.19 · View on Amazon

$23.99 · 20% off

#ad We earn a commission · price as of November 20, 2026

3. Best plate upgrade

BIQU CryoGrip Pro Glacier Panda Build Plate

A double-sided coated spring steel sheet at 257 x 257 mm that fits almost every 256 mm Bambu machine, including the P2S and X2D.

A spare plate is the cheapest uptime in this hobby. A failed first layer stops the queue until the plate is cleaned and cooled; with a second one you pop it on and keep printing. The registry records this as a double-sided coated spring steel sheet at 257 x 257 mm, fitting the P1S, P1P, P2S, X1C, X1E, X2D and A1 — which is nearly the whole 256 mm class in one part.

Double-sided is the detail that makes it a better buy than a second identical plate: two surfaces means two adhesion characters, so you are not committing the plate to one material family. The build plate roundup ranks the surfaces, and textured versus smooth is the page on what each side is actually for.

The honest caution is fitment, and it is the single most common wrong purchase in this category: the 257 mm plates listed for the 256 mm machines do not fit an A1 mini, whose bed is a different size altogether. Build plate sizes sets out the two classes.

What it gets right

  • Fits seven different Bambu models, so it survives your next printer
  • Priced to be the second plate, which is what actually keeps a machine printing
  • Textured coating releases cooled parts cleanly without a scraper

What it does not

  • A third-party surface means re-doing your Z offset and probably your first-layer flow
  • Coated steel is not PEI — adhesion behavior differs by material, so expect a learning print or two
  • Nothing here is an upgrade over a healthy official plate; it is a spare
BIQU CryoGrip Pro Glacier Panda Build Plate — published specifications
SurfaceDouble-sided coated spring steel sheet
Size257 x 257 mm
FitsBambu Lab P1S, P1P, P2S, X1C, X1E, X2D and A1
BIQU Panda Jetpack Printhead Cover + Cooling Fan Duct product photo
$29.99 · View on Amazon

#ad We earn a commission · price as of November 20, 2026

4. Best print-quality upgrade

BIQU Panda Jetpack Printhead Cover + Cooling Fan Duct

A nylon printhead cover with an integrated cooling duct, aimed at the overhangs and bridges that curl no matter what you change in the slicer.

Of the parts on this page, this is the one that can actually change how a print looks. The registry records it as a printhead front cover with an integrated cooling fan duct, made of nylon, fitting the P1 and X1 series as well as the Panda Revo and Flow hotends, and targeting nozzle-area airflow, bridges and overhangs.

The mechanism is simple enough to trust: a steeper overhang holds its shape only if the extruded material freezes before it droops, and that is a function of how much air reaches the right place at the right moment. A duct that aims the existing fan better is a cheaper answer than a new machine for exactly that fault. Print quality issues is the diagnosis page, and it is worth reading first because several of the fixes there are free.

Two honest cons. More cooling is actively wrong for ABS and ASA, which want still warm air and split when cooled hard, so this is a PLA-and-PETG upgrade. And nylon printed parts near a hotend are a sensible material choice but still a consumable — expect to replace it eventually.

What it gets right

  • Reshaping the air at the nozzle is a real geometry fix for curling overhangs
  • Nylon tolerates chamber heat far better than a printed PLA duct would
  • Cheap, and it addresses a fault that slicer settings alone often cannot

What it does not

  • More cooling on ABS and ASA causes layer splitting — this helps PLA and PETG, and can hurt the others
  • Changing airflow invalidates your tuned profiles; re-test overhangs after fitting
  • P1/X1 fitment only, and the listing pairs it with the Panda Revo and Flow hotends
BIQU Panda Jetpack Printhead Cover + Cooling Fan Duct — published specifications
TypePrinthead front cover with an integrated cooling fan duct
MaterialNylon
FitsBambu Lab P1/X1 series, and the Panda Revo and Flow hotends
TargetsNozzle-area airflow, bridges, overhangs
BIQU Panda Claw Extruder Gear Set product photo
$19.99 · View on Amazon

$24.99 · 20% off

#ad We earn a commission · price as of November 20, 2026

5. Best repair part to keep on the shelf

BIQU Panda Claw Extruder Gear Set

Golden nano-coated hardened steel extruder gears for the X1, P1 and A1 series - the fix for gears that have started chewing filament instead of pushing it.

Extruder gears are the part that fails quietly. They do not break; they polish and round until they skate on the filament, and the symptom looks like under-extrusion, intermittent gaps or a feed that stalls partway up a tall print. The registry records this set as golden nano-coated hardened steel gears fitting the X1, P1 and A1 series, with stated support for PLA, PETG, TPU and ABS and a vendor claim of improved grip and fewer jams.

The reason it belongs on a page about this price bracket is that the alternative is absurd: people replace an entire extruder or start shopping for a printer over a fault a cheap gear set fixes. Abrasive filament accelerates the wear, so if you have been running carbon-filled material through a stock extruder, this is the part to have in a drawer. Filament not feeding covers diagnosing it against the other three causes before you buy.

Honest framing: buy it when you have the symptom or when you print abrasives routinely. Buying it on a healthy machine is maintenance theater, and the maintenance page is clear that most of what matters at this level costs nothing.

What it gets right

  • Extruder gears are a wear item, and a worn set causes under-extrusion that looks like six other faults
  • Hardened and coated gears grip TPU better than the stock set, which is the common TPU-slipping complaint
  • Fits X1, P1 and A1 — one part number for most of the lineup

What it does not

  • This is a repair for a real symptom, not an upgrade to buy preemptively
  • An extruder teardown is the most intimidating job on the machine for a first-timer
  • If your gears are not worn, new gears will change nothing
BIQU Panda Claw Extruder Gear Set — published specifications
MaterialGolden nano-coated hardened steel gears
FitsBambu X1, P1 and A1 series
Materials supportedPLA, PETG, TPU, ABS
Stated benefitImproved grip, fewer jams
BIQU PyroGrip Textured PEI Plate product photo
$15.19 · View on Amazon

$18.99 · 20% off

#ad We earn a commission · price as of November 20, 2026

6. Budget pick

BIQU PyroGrip Textured PEI Plate

Textured PEI on the same mounting system as the official plate, at a cited roughly half the official price. The cheapest upgrade here that still changes something.

The budget end of this page is a plate, and that is not a consolation prize. Textured PEI is the default surface for a reason: it grips PLA, PETG and ABS without glue for most geometry, hides the first layer rather than showing every flaw, and releases when it cools. The registry records this one as textured PEI on the same mounting system as the official plate, at a cited roughly half the official plate's price.

At this price the decision is not whether it is worth it but how many you want. Two plates means the queue never waits for a cleaning cycle; three means you can dedicate one to a material that marks a surface. The textured PEI page is the reference, and plate temperatures by material carries the manufacturer's own published figures.

Cons, stated plainly: one surface rather than two, so it is less flexible than the double-sided pick above; and third-party plates vary in coating durability, which is not something this site has measured on any of them.

What it gets right

  • Same surface technology and mounting as the official plate at a much lower price point
  • Makes keeping two or three plates on the shelf a reasonable decision rather than an expensive one
  • No adapter, no modification — it drops onto the magnetic bed you already have

What it does not

  • PEI thickness and coating consistency vary more between third-party plates than within one brand's official line
  • Expect to re-tune Z offset when you swap brands mid-queue
  • Not a performance upgrade over the official plate — a price one
BIQU PyroGrip Textured PEI Plate — published specifications
SurfaceTextured PEI
MountingSame mounting system as the official plate
Price positioning (cited)Roughly half the official plate

Questions people actually ask

What is the best Bambu Lab upgrade under $100?

The Panda Touch, for a P1P or P1S owner. The registry records a 5-inch touchscreen that powers from the printer's own USB port, fits the P1P and P1S, interfaces with the X1 and A1 series, and is vendor-stated to control up to ten printers from one unit. It fixes the single most-complained-about thing on the most-owned machine, for a fraction of the step up to a printer that includes a screen.

Which upgrade under $100 actually changes what my printer can print?

Only the hardened steel hotend. The Bambu Lab wiki records the P1 series as shipping a stainless steel hotend for standard non-abrasive filament, and 3DJake lists both A-series machines with a stainless nozzle as supplied, while the MatterHackers PA6-CF listing instructs you to use hardened steel instead. Everything else in this bracket improves a capability the machine already has.

Is a third-party build plate as good as the official one?

On fitment and surface type, the third-party plates in this bracket match: the registry records them on the same mounting system and at 257 x 257 mm for the 256 mm machines, with one of them double-sided. On coating durability we have no measurements for any of them, so that is not a claim this site makes. What is certain is that a second plate is the cheapest way to stop a failed first layer from halting the queue.

Will any of these upgrades void my Bambu Lab warranty?

The Panda Touch vendor states that installing it does not void the printer warranty - that is their claim, recorded as stated, not a legal opinion from this site. A complete first-party hardened hotend assembly is a standard serviceable part. For anything that involves cutting, drilling or rewiring, assume the opposite and check Bambu's own terms before you start.

Do these parts fit the A1 and A1 mini?

Partly, and this is the most common wrong purchase here. The extruder gear set is listed for the X1, P1 and A1 series. The double-sided plate is listed for the A1 but not the A1 mini, whose bed is a different class entirely. The hardened hotend above is a P-series and X1 part; the A-series takes its own. The cooling duct is listed for the P1 and X1 series. Check the fitment row on each product card against your exact model.

Should I spend $100 on upgrades or save it toward a new printer?

Upgrade for anything that is a part, save for anything structural. A touchscreen, a hotend, a plate, a duct and a gear set are all parts, and each costs a small fraction of a machine. An enclosure, a larger bed and an actively heated chamber cannot be bought as parts at all - those are the only reasons at this budget to put the money toward a printer instead.

How is the $100 line on this page verified?

Against the live Amazon figure each buy button carries, refreshed daily and shown with the date it was last checked; nothing is typed into the copy. Every pick on this page sat at roughly half the line or less when it was published, so none of them is a borderline case. The next part up in the same family, the Panda Revo hotend, was clearly above the line and gets no buy row here.

What about the free upgrades?

They come first, and this site says so repeatedly. Cleaning and lubricating the rails, tightening belts, re-leveling, cleaning the plate with dish soap rather than isopropyl alone, and fixing the slicer profile cost nothing and outperform several of the parts on this page. The under-$30 page leads with them, and the maintenance page is explicit that the highest-return hour in this hobby is free.

Sources